ebinmaine 73,017 #26 Posted August 26, 2019 1 hour ago, AHS said: Now I can get the choke cable piece... I think I’m going to have to make it... I don't think I have any extra ones but I'd be glad to take a look. If not, I can snap a couple pictures for you. You may be able to go to an aftermarket parts store such as Advance or Napa and get a universal choke cable kit for less than $10. That would have some brackets in it. 1 Share this post Link to post Share on other sites
ebinmaine 73,017 #27 Posted August 31, 2019 On 8/26/2019 at 12:49 PM, ebinmaine said: I don't think I have any extra ones but I'd be glad to take a look. If not, I can snap a couple pictures for you. You may be able to go to an aftermarket parts store such as Advance or Napa and get a universal choke cable kit for less than $10. That would have some brackets in it. @AHS I haven't forgotten about that. Just been busy. I'll try to get some pics today for you. Share this post Link to post Share on other sites
AHS 1,550 #28 Posted August 31, 2019 Ya, I have been working on my long Shute snowblower. I did get the 5 pin harness, for the key switch. 1 Share this post Link to post Share on other sites
ebinmaine 73,017 #29 Posted August 31, 2019 Here's a picture of a 12 horse that was destined to be on a gocart. It has a Shaker plate bolted to the bottom of it so the vintage would have been something like 78 to 82. Maybe a little later. Black paint could tell you that it is a replacement engine. I say all that because I do realize it's not as old as yours but this is the hook up I have on two or three different C Series here. Note the lever that sticks out right even with the bottom of the bowl of the carburetor. The choke is the triangular lever just above it. Cable of course would have come up from the bottom. 1 Share this post Link to post Share on other sites