AHS 1,546 #1 Posted August 1, 2019 This is my fathers 310-8. It starts and runs fine, but 1/2- 3/4 throttle is all she wants! Then it’ll start over revving. My fathers got the 310 off a guy who said he had the carb apart... I just wanted to be sure that all the linkages were up to snuff. He has mowed the lawn with it 3/4 throttle for 4 years now. Are the spring ends in the right place? Is it even the correct spring? The last picture, the cam; is that in the wrong place? Share this post Link to post Share on other sites
AHS 1,546 #2 Posted August 1, 2019 Ok, I’ve visited youtube, and I have learned how to set the governor... we’ll see how that goes! Share this post Link to post Share on other sites
The Tuul Crib 7,339 #3 Posted August 2, 2019 I definitely would clean the engine some. It could help prevent the possibility of over heating. Check also the manuals section. 3 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,489 #4 Posted August 2, 2019 You may get something from this service bulletin Garry Share this post Link to post Share on other sites
AHS 1,546 #5 Posted August 2, 2019 It was the governor, that takes two men to adjust the governor ON a tractor! Jeese those governors are finicky!!👍 all set! Share this post Link to post Share on other sites
