Brian 0 #1 Posted April 12, 2009 My dad and I made a gasket today in the intake (there was none) so we think we ruled that out. Then it was running rich and we took out the float and it was so brittle that it basicly fell apart. I dont have a tractor supply where I live so is there any other places that i could possibly go to? Share this post Link to post Share on other sites
Rollerman 290 #2 Posted April 12, 2009 Brian here's a great source for Onan parts. Real good guy to deal with & often has more than whats listed. http://www.gphope.com/ Share this post Link to post Share on other sites
Nick 13 #3 Posted April 12, 2009 If nothing else works a Toro dealer should be able to get parts but not cheap. The Onan as we knew it on Wheel Horse tractors is gone. The Onan twins made lots of torque but liked fuel and couldnt meet EPA rules so the new Onan is overhead valve. This is the Cummins Onan site and also the PDF for the new OHV engine. http://www.cumminsonan.com/engines/ http://www.cumminsonan.com/www/pdf/specsheets/a-1415.pdf Share this post Link to post Share on other sites
Brian 0 #4 Posted April 12, 2009 Brian here's a great source for Onan parts. Real good guy to deal with & often has more than whats listed. http://www.gphope.com/ Thank You so much! I really apreaciate this. He has just what we need. Share this post Link to post Share on other sites
Brian 0 #5 Posted April 16, 2009 Thank You guys! heres how she runs now Share this post Link to post Share on other sites
