toro 92-7082 replacement flat idler pulley

[toroboi265 0]

part that i need is 92-7082( not 92-7084) https://www.amazon.com/gp/product/B008TSVM0W/ref=ox_sc_act_title_2?smid=A16NVWA9G6RLXM&psc=1  but i paid 50 bucks for this lawn mower and not looking to sink almost that much into one part... any recommendations. was thinking this might work  https://www.amazon.com/d/Lawn-Mower-Parts/Replacement-Pulley-Craftsman-Poulan-Husqvarna/B004CAREBM . but not sure i have been looking but want second opinions.  mower is a toro wheel horse 265 6 speed

[wallfish 15,907]

 

Measure the diameter and bore sizes to find one of that size. You can look here

https://www.surpluscenter.com/Pulleys-V-Belts/Idler-Pulleys/

 

Tractor Supply carries idler pulleys.

Edited July 24, 2019 by wallfish

[gwest_ca-(File Mod) 10,479]

There is a list of Stens pulleys and their dimensions here you can download

Garry

[Lee1977 6,211]

If the center grove isn't welded and it has a sealed bearing you can drill out the spot welds.t

 

The sealed bearing will also have a sieve pressed in the center that nocked out and put in the new bearing. The flat idlers I have fixed had a 1623 bearing

1 3/8" O.D. 5/8" I.D. and 7/16" wide should find the bear for around $5.00 on Ebay. The cheap Idlers usually don't have sealed bearings.

These are mule drive idlers. i have done the other belt drive idlers just don't have a picture.

 

Edited July 24, 2019 by Lee1977

[toroboi265 0]

I'm going to keep all this in mind but I got the go ahead to just buy new or re-manufactured it was around 50 where I found it. But thanks guys for the help and I will definitely keep all this info incase I need to get another one.    And the thought to drill it out never even crossed my mind.