Elliot Garfinkel 166 #1 Posted July 19, 2019 Hi all I'm really far from being ready but here goes how tall of a tire can you put on the 702 while keeping fenders and the hood in the front how does that get attached with a bolt and nut or is it get threaded to a fixed nut. Thanks for your patience and expertise, Elliot Share this post Link to post Share on other sites
The Tuul Crib 7,339 #2 Posted July 19, 2019 23 would be as tall as l would go. 6x12 . to Share this post Link to post Share on other sites
Elliot Garfinkel 166 #3 Posted July 19, 2019 Thanks for the reply I seen tires that I think were 12.00x6 and they were 24 inches and the ad said they were taller than 12-6 I know their was a post on this but not really sure of outcome Share this post Link to post Share on other sites
The Tuul Crib 7,339 #4 Posted July 19, 2019 I put 23 8.50 x 12 on my 855 . They were the deestone tires and they fit and looked great! 1 2 Share this post Link to post Share on other sites
Pullstart 67,092 #5 Posted July 19, 2019 There are three thumb screws that hold the hood on. Two short ones thread into the tank and one longer one goes through the front of the frame into a weld nut on the hood. I have 23x10.5 r 12 Deestone Ag tires on my 502 and have no clearance issues. @Elliot Garfinkel! 1 2 Share this post Link to post Share on other sites
Elliot Garfinkel 166 #6 Posted July 20, 2019 Thanks for you quick reply nice looking tractor if that's the one you have plenty of clearance so the front screw is not exposed Share this post Link to post Share on other sites
Pullstart 67,092 #7 Posted July 20, 2019 2 minutes ago, Elliot Garfinkel said: Thanks for you quick reply nice looking tractor if that's the one you have plenty of clearance so the front screw is not exposed I circled the two visible thumb screws. Without my hanging weight, it would be much more visible. Thanks, I call it Putt Putt and there’s a build thread link in my signature if you need more reference. 1 Share this post Link to post Share on other sites
Elliot Garfinkel 166 #8 Posted July 20, 2019 Ok thanks much appreciated Share this post Link to post Share on other sites
ACman 7,655 #9 Posted July 20, 2019 (edited) A-Z tractor which is one of our vendors sells them. https://www.ebay.com/itm/Wheel-Horse-1345-1346-Thumb-screws-for-all-round-hood-lawn-ranger-tractors/262902740352?hash=item3d36397580:g:O1kAAOSw4ltatO~9 Edited July 20, 2019 by ACman Share this post Link to post Share on other sites
