Docwheelhorse 2,740 #1 Posted June 3, 2019 Hi All, getting close to the show and can't wait!! So... I have a 1277 with a broken steering wheel... right thru both spokes. I didn't see the typical roll pin so I pulled off the "horn button" found a 1/2" or 9/16" bolt going down the center... are these steering wheels splined or a taper lock or? Am I going to destroy half the tractor trying to get it apart because I don't know what I'm doing? Help Please and Thanks Tony Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,530 #2 Posted June 3, 2019 I do not know but here is the ipl showing a 4875 steering wheel. I remembered this service bulletin. Click on the fuzzy picture and you can read it or download if desired. Garry Share this post Link to post Share on other sites
pfrederi 18,719 #3 Posted June 3, 2019 Bolt woodruff key and a roll pin...Guess they didn't want it to fall off. Never argue with a man who wears a belt and suspenders.... 5 Share this post Link to post Share on other sites
The Tuul Crib 7,339 #4 Posted June 3, 2019 No taper on the shaft. Lot and lots of PB blaster and patience! Good luck! Share this post Link to post Share on other sites
