Wheelhorselou 2 #1 Posted June 2, 2019 I just picked up a c160 wheel horse. I’m going to restore it and use it. First up I need a new drive belt and belt that runs off the side of engine down to the mowing deck. Anyone have any part numbers for these? Thanks in advance 1 1 Share this post Link to post Share on other sites
Lee1977 7,232 #2 Posted June 2, 2019 We need to know what deck you have before anyone can give you a correct answer. It could be a 36" , 42" or a 48" deck. " Share this post Link to post Share on other sites
Wheelhorselou 2 #3 Posted June 2, 2019 It is a rear discharge 42” deck Share this post Link to post Share on other sites
rjg854 12,260 #4 Posted June 2, 2019 First off, lou, I'm sure you'll get the answers you're looking for soon. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,530 #5 Posted June 2, 2019 The belts are listed on the pages that come up. Click on each picture May not be the model of deck you have but the belts are the same Garry 3 1 Share this post Link to post Share on other sites
Wheelhorselou 2 #6 Posted June 2, 2019 Does it matter that my id number is different? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,530 #7 Posted June 2, 2019 Sorry. Thought I had included the auto model but did not. Go back to the previous post and it is there now. Yes the hydro models use a different belt. More info on this model in no particular order so look through them all. https://www.wheelhorseforum.com/search/?&q="71-16ks02"&type=downloads_file&search_and_or=or Garry 2 Share this post Link to post Share on other sites
ZXT 2,401 #9 Posted June 3, 2019 , Lou! Was that tractor on Craigslist or FB marketplace about a month ago? I remember one popping up that was somewhere around Norman. Feel free to post some pictures of the tractor! We like pictures. Share this post Link to post Share on other sites
Darb1964 1,120 #10 Posted June 3, 2019 C160_8 lucky dog,welcome.they are a beast Share this post Link to post Share on other sites
ClassicTractorProfessor 5,371 #11 Posted June 3, 2019 18 minutes ago, ZXT said: Was that tractor on Craigslist or FB marketplace about a month ago? I remember one popping up that was somewhere around Norman. I think I know the tractor you’re referring to...almost picked it up myself. @Wheelhorselou welcome to RedSquare, glad to see another fellow Okie here on the Square, I’m from up on the Woodward area. If you have any questions don’t hesitate to ask and someone here is sure to have an answer 2 Share this post Link to post Share on other sites
Wheelhorselou 2 #12 Posted June 3, 2019 Thanks everyone for the warm welcome!! Yes it was on fb marketplace in Norman. It runs great. I just need to replace the belts and maintenance it till this winter and then I’ll restore it Share this post Link to post Share on other sites
ericj 1,579 #13 Posted June 3, 2019 2 hours ago, Wheelhorselou said: Thanks everyone for the warm welcome!! Yes it was on fb marketplace in Norman. It runs great. I just need to replace the belts and maintenance it till this winter and then I’ll restore it to RS I was out in Norman a couple of years ago Johnson Controls sent me out there for school on their rooftop units eric j 1 Share this post Link to post Share on other sites
