Firebug 267 #1 Posted May 28, 2019 I have a rear discharge deck. Model 78350. I was told it takes a 1/2x89 belt. That is way to long, I believe that is the pto belt length. What should the length be for the spindles. Also, what is the proper way to adjust the tensioner Share this post Link to post Share on other sites
buckrancher 2,694 #2 Posted May 28, 2019 that is the correct belt you do not have it routed correctly Share this post Link to post Share on other sites
Firebug 267 #3 Posted May 28, 2019 Well that makes sense. It has the diagram right on the deck. I guess I should have checked that before I looked like a donkey Share this post Link to post Share on other sites
Ed Kennell 42,108 #4 Posted May 28, 2019 2 hours ago, Firebug said: Well that makes sense. It has the diagram right on the deck. I guess I should have checked that before I looked like a donkey Nah, the instructions are only there as a last resort. 3 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,510 #6 Posted May 28, 2019 Here is the last operator manual they printed for this 78350 deck. It should answer any questions you have. Garry Share this post Link to post Share on other sites
Firebug 267 #7 Posted May 28, 2019 Amazing what you can accomplish when you look at pictures 1 1 Share this post Link to post Share on other sites
