Jennifer 1,878 #1 Posted May 12, 2019 Ok I am calling on all the great people with there wisdom an knowledge to help me out with this problem... I bought an old Schnacke from a sale. I cleaned and oiled it even painted it. Bought the nut off eBay and used it for a very short time. When the C clip on one of the three pins would fall off. After inspecting found that one pin to me was shot.. The end that had the grove for the C clip was damaged and warn. So what I am asking is where or how can I get a new pin. Or is this now just a parts unit? Share this post Link to post Share on other sites
roadapples 6,983 #2 Posted May 12, 2019 (edited) Not familiar with this, but I have drilled a hole where the slot is and replaced C or E clips with cotter pins. Hope this helps... Edited May 12, 2019 by roadapples Speeling Share this post Link to post Share on other sites
