Toolmanbill 34 #1 Posted April 27, 2019 Has anyone tried the Kevlar belts listed on the internet?the belt from the pto to the mower deck on my 314-8(1994)doesn’t seem to last very long.also would like any info on replacing the seat with the seat switch still usable ,would like to replace it with a low back version as I am getting older and swinging my leg over the seat is getting more difficult (hips don’t work like they used to.Thanks for any input. 1 Share this post Link to post Share on other sites
squonk 43,961 #2 Posted April 27, 2019 (edited) I use Napa Green belts Example: 4L970W or TSC !/2' X 97" blue. These particular belts are kevlar and fit my 76 C-160 PTO to deck. Deck is a RD 42" recycler Edited April 27, 2019 by squonk 1 Share this post Link to post Share on other sites
bc.gold 3,406 #3 Posted April 27, 2019 Every belt I own gets replaced with Kevlar. Share this post Link to post Share on other sites
953 nut 60,403 #4 Posted April 27, 2019 6 minutes ago, bcgold said: Every belt I own gets replaced with Kevlar. There is one exception to that rule. If replacing the Starter/generator belt it should have a raw rubber edge. Share this post Link to post Share on other sites
Toolmanbill 34 #5 Posted April 30, 2019 Thanks much.going to try them. 1 Share this post Link to post Share on other sites
