Kevlar belts

[Toolmanbill 36]

Has anyone tried the Kevlar belts listed on the internet?the belt from the pto to the mower deck on my 314-8(1994)doesn’t seem to last very long.also would like any info on replacing the seat with the seat switch still usable ,would like to replace it with a low back version as I am getting older and swinging my leg over the seat is getting more difficult (hips don’t work like they used to.Thanks for any input.

[squonk 44,923]

I use Napa Green belts Example: 4L970W or TSC !/2' X 97" blue. These particular belts are kevlar and fit my 76 C-160 PTO to deck. Deck is a RD  42" recycler

Edited April 27, 2019 by squonk

[bc.gold 3,406]

Every belt I own gets replaced with Kevlar.

[953 nut 63,171]

6 minutes ago, bcgold said:

Every belt I own gets replaced with Kevlar.

There is one exception to that rule. If replacing the Starter/generator belt it should have a raw rubber edge.

[Toolmanbill 36]

Thanks much.going to try them.