OlScrappy 0 #1 Posted April 13, 2019 I am looking for the engine to hydro pump adaptor for a D160 that mounts on the hydro pump. It is made of cast an splined . Share this post Link to post Share on other sites
daveoman1966 3,841 #2 Posted April 13, 2019 that part is # 103029 used with rubber part # 102622 and is shown on page 3 of this .pdf file. Maybe find on Fleabay ,orat this website: https://www.psep1.biz/arinet.asp?aribrand=TO# D SERIES ALL LIST (3).pdf Share this post Link to post Share on other sites
OlScrappy 0 #3 Posted April 13, 2019 Thanks for the info i appreciate it ! Share this post Link to post Share on other sites
dells68 7,499 #4 Posted April 13, 2019 Try A-Z. I would bet he has some good used ones. He bought several D’s almost a couple of years ago at an auction in Charlottesville, VA. Lincoln is a good guy! 1 Share this post Link to post Share on other sites
Sarge 3,465 #5 Posted April 14, 2019 Have you had a problem with that splined shaft stripping from wear? Might want to search this forum - this has been addressed quite a few times and it is a common weak spot in the big D's design. Might want to read through this thread - https://www.wheelhorseforum.com/topic/72096-d-180-pump-coupling-alignment/?tab=comments#comment-685635 Sarge 1 Share this post Link to post Share on other sites
