Dual Wheels 2 #1 Posted March 31, 2009 Thank's to the input from fellow RS members, I was able to get two of my projects off my list ( well all but painted).... The first I have to thank kpinnc for his real good plans for a three point A-frame. that can actually be used for alot of things..The plans were for a sleeve hitch adapter... Second Thanks to Nick and C-Series 14..I was able to produce a set of sliding forks for my FEL Now that the final fit is done ,I can remove both and make them look complete with a little paint....Thank's guys :drool: Share this post Link to post Share on other sites
Rollerman 290 #2 Posted March 31, 2009 DW nice setup with the forks & the 3PH A frame. Did you build the A frame from scratch or go buy a set of plans? Share this post Link to post Share on other sites
TJ 171 #3 Posted March 31, 2009 Looking good. :omg: Share this post Link to post Share on other sites
C-Series14 15 #4 Posted March 31, 2009 COPY CAT!!! My forks have an angle to the front of them for sliding under stuff....just an idea... Nice job, they are heavy though, aren't they!!! Share this post Link to post Share on other sites
Brrly1 1,146 #5 Posted March 31, 2009 Nice Truck!!! Burly :omg: Share this post Link to post Share on other sites
Dual Wheels 2 #6 Posted March 31, 2009 Mike...I gave you credit in my post ...yes they are very heavy and I was just makeing sure everything fit and worked..I plan on tapering the bottom of the forks then paint them.. :omg: Share this post Link to post Share on other sites
C-Series14 15 #7 Posted March 31, 2009 I was just mesing with ya. They look good, and they will come in handy! Share this post Link to post Share on other sites
Operator 7 #8 Posted March 31, 2009 Yup Burly I was thinking the same - nice truck! Nice equipment too, pallet forks are always good Randy Share this post Link to post Share on other sites
Dual Wheels 2 #9 Posted March 31, 2009 I think the A-frame looks much better painted...especially WH Red... Now I'll have to get it dirty, to match the tractor.. :drool: Share this post Link to post Share on other sites
Nick 13 #10 Posted April 1, 2009 Very nice work on the A frame and the forks. The red paint does top it off. As Mike said the forks will come in real handy. They will open up a lot of new uses for the loader and keep it busy. Your project makes me want to build a set of adjustable forks for the KW. Somewhere in Ky on the 127 yard sale I found a set of forks to use, just need to build the framework. But I found the forks 3 years ago and the project is still on the list to do. Share this post Link to post Share on other sites