Jump to content
Sign in to follow this  
case442

1975 D-180 pto clutch

Recommended Posts

case442

Hi all,

I'm new to the Wheel Horse products. I have recently picked up a 1975 D-180 tractor with the PTO, 3 point hitch, 48" mower deck, blinley plow, rototiller, and a newer (77-79?) parts tractor. Now for my need! the pto hub part #102906 stamped on the hub, is worn out and cracked. I live in the pittsburgh PA area, and cant seem too locate one. I'm sure I could take it to a machine shop and have it repaired, however if anyone has one available, please let me know. My tractor Model number is 1 0612.

Thank you,

Mike

Share this post


Link to post
Share on other sites
 
wheel horse 1045

did you check ebay?

Share this post


Link to post
Share on other sites
 
case442

Hi,

Yes I looked on E-Bay first but didn't see what I need.

Thanks, Mike

Share this post


Link to post
Share on other sites
 
 
case442

Hi Steve,

Thank you for the info, according to the spec sheet the part # 14-24 or 14-25 is what I need. I would imagine that I need the part that is "not available" as the $ 20 something dollar part seems way too cheap for that assembly. If you do have this part that would be great!. I noticed today I also need the small u-joint in my pto shaft for the tiller perhaps you would know if they are still available.

Thanks again Steve!

Mike

Share this post


Link to post
Share on other sites
 
bitten

Mike

#14-24 is the part you are looking for, atleast that is what Im thinking from your post. I almost sure i have one if Steve doesnt. You will need to get the clutch disk # 14-25 and the 4 brass rivets to go with it.

When I did mine I got all new bearings, washers, snap rings and the spiroloc rings. Was kinda pricy but I know that it will last for a very long time with the proper care that the previous owner neglected. I actually take it off when Im not useing the tiller to prolong the life of it. My manual says to take it apart once a year and greas it.

As for the tiller u-joint Im not to sure of right now. I cant find my manual for it to give you the part number. If you have the model number just put it into the link that Steve gave you and you will be able to see if Toro has it or maybe cross referance it to other u-joints.

Hope this helps,

P.J.

Share this post


Link to post
Share on other sites
 
refracman

Mike

Don't have the u joint but I believe have the clutch part. I'll check tomorrow nite and send you a pm.

Share this post


Link to post
Share on other sites
 
case442

Steve and PJ,

Thank you so much guy's, I really appreciate your help in this matter. Let me know how much you would like for the parts if by chance you do have them. Iwould like to get my tiller going.

By the way the Brinly single bottom plow, does this tractor have enough power to pull this? it looks really big!.

Thanks again,

Mike

Share this post


Link to post
Share on other sites
 
catman81056

By the way the Brinly single bottom plow, does this tractor have enough power to pull this? it looks really big!.

Power to spare :omg:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...