Jump to content
The Wheel Horse Lady

C series clutch pedal safety switch connector

Recommended Posts

The Wheel Horse Lady

Hello all.

 

Does anybody have a source for the plastic connector and terminals that fit on the clutch pedal safety switch part number 101845? It looks like the picture I have attached. 

I'm making my own wiring harness' and would like to be able to incorporate this connector into the harness that way I won't have any splices in it. 

 

 

Thanks,

The Wheel Horse Lady 

20190225_091817.jpg

Edited by The Wheel Horse Lady
  • Like 1

Share this post


Link to post
Share on other sites
 
classiccat

I was looking for the same thing.

 

With a little persuasion, I was able to fit a regular spade terminals over the individual studs and punch a little dimple to hold it in place.  it's fairly secure.

 

If there's a second source for this connector, that would be solid!

  • Like 1

Share this post


Link to post
Share on other sites
 
The Tuul Crib

Any single connector should work if you can't find the double. I'm not sure on any part numbers

:text-welcomeconfetti:to:rs:

:wwp:

  • Like 1

Share this post


Link to post
Share on other sites
 
The Wheel Horse Lady

Thanks guys. Yes I know a single terminal will work on each post of the switch....but I'm looking for the double terminal plastic connector. 

 

Thanks. :)

Edited by The Wheel Horse Lady
  • Like 1

Share this post


Link to post
Share on other sites
 
gwest_ca

If you have the original connector you can release the terminals and insert new ones.

The original WH number was 106024 but no longer available from Toro.

Found it here

http://terminalsupplyco.com/Store/Default.aspx?CATDRILL=DEL010&PCAT=54228#Categories

Part number 2973407 about half way down the page.

This same style of switch was used by GM and I believe Chrysler or Jeep in the past so that should be another source.

 

Garry

  • Thanks 2

Share this post


Link to post
Share on other sites
 
cafoose
 
classiccat
 
The Wheel Horse Lady

That looks like that's it!:woohoo:

 

Thanks everybody!!!! :text-thankyouyellow:

 

I figured somebody had to be making them because like you said Garry, Jeep used that same style switch. :happy-jumpyellow:

  • Like 2

Share this post


Link to post
Share on other sites
 
Goldnboy

I think that these links to connectors NLA should be pinned.

 

Thanks for the link bought two for me today!

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...