Spareparts 85 #1 Posted January 4, 2019 Working on a project that will have a PTO shaft on the flywheel end and having a hard time finding a supplier for one, it has 3 bolt holes on the flywheel instead of the regular 4 bolt holes that the Kohler has. Some of the people that I pull with have switched to the Preditor enging on their (excuse my foul mouth) Cub Cadet so someone has to be making them and so far I have not been able to reach out to them, any help would be helpful Thanks. Share this post Link to post Share on other sites
WHX?? 50,803 #2 Posted January 4, 2019 Check with Midwest super cubs.Com ..they might have an answer. They make anything for pulling tractors. Best to call them most of what they can do is not listed on their website. A few members here run predators for pullers. 1 Share this post Link to post Share on other sites
DerekN 5 #3 Posted January 4, 2019 https://www.performance670.com/about-us I have never dealt with them but apparently the predator engine is gaining popularity. 1 Share this post Link to post Share on other sites
Spareparts 85 #4 Posted January 5, 2019 Called Mid West today and they werent any help, the girl suggested calling HF and ask for parts dept so I will try that, problem is I don't speak Chinese. We have a pullers meeting shortly so I will check there, about 8 of our pullers have use the Preditor's so someone makes the shaft, thanks for the help and when I find out anything I will post it here Share this post Link to post Share on other sites
Jake Wilkerson 38 #5 Posted January 5, 2019 (edited) Are these what you are looking for? https://www.performance670.com/product-detail/predator-670-kohler-adapter https://www.performance670.com/product-detail/flywheel-pto-drive-kit Edited January 5, 2019 by asleepz Added link Share this post Link to post Share on other sites
Spareparts 85 #6 Posted January 5, 2019 That is exactly what I need Thank you very much for the help. 1 Share this post Link to post Share on other sites
