What are these?

[Spareparts 88]

Check end play on the crankshaft, if the thrust bearing is going out you might excessive end play

[CW418A 5]

Well it was the thrust bearing and we did have about a 1/4 play on the crankshaft.  They recommended a rebuild or a new engine.  Just went and found a low hour 416H and a 312H and spent less on both than to replace the motor.

[Spareparts 88]

Don't discard the camshaft, the pullers with the K-341's like that shaft, a little more lift 

than the stock 341's. Check Brian Millers web site, might be worth a little change.

[CW418A 5]

13 hours ago, Spareparts said:

Don't discard the camshaft, the pullers with the K-341's like that shaft, a little more lift 

than the stock 341's. Check Brian Millers web site, might be worth a little change.

 

 

I found two much newer wheel horse tractors for $900 on with 300 hours and one with 500.   For that it doesnt pay to put money into a 1800 hour tractor.