79362 Snowthrower crank support assembly

[O2B__ 7]

My tall chute snowthrower came to me with the chute crank but without the assembly that supports it.  These are still available for over $100, but it looks like a substitute would be fairly easy to make.  Can anyone provide me with measurements from the end of the rod that attaches under the tractor to the center of the bend, and from the bend upward to the hole the crank goes through?  Thanks.

[O2B__ 7]

Can anyone help with this?

[1995 520H+96+97 937]

This is for a Toro XI series. The lower part is longer than the one on my 520H.

[O2B__ 7]

Thanks very much.  That helps a lot.

[WVHillbilly520H 10,376]

Here's what they look like mounted,  sorry can't measure it as I've sold both tractors with the single-stages, Jeff.

[O2B__ 7]

Thanks WVHillbilly520H, for the additional photos.  Seeing it on the tractor is helpful.