Skipper 1,788 #1 Posted April 10, 2018 (edited) Guess the title says it all. I will attempt to have new linings made, but I do not have a new clutch to measure. I was hoping someone may have one laying around, or one in nearly new condition, and that this person then could measure the thickness of the lining, or if it is trouble taking it off, then perhaps just the "rest usable wear" seen as the distance left for the clutch to travel when engaged. I have a clutch here that shows about 1/10 inch, but that is not new afaikt. Perhaps new thickness is the same as the flat style clutch, 0.125"? Any input will be greatly appreciated Edited April 10, 2018 by Skipper 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #2 Posted April 16, 2018 Skipper, I would be interested in one. 1 Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #3 Posted April 16, 2018 After a quick search on ebay for part number 109705 I found a listing for a new one for $6.99 with free shipping. Check it out. Share this post Link to post Share on other sites
Skipper 1,788 #4 Posted April 16, 2018 (edited) Yeah that is for the pto brake Good try though! If I find a source for the correct clutch material I will let you all know Any input is really welcome........ Edited April 16, 2018 by Skipper 1 Share this post Link to post Share on other sites
tarcoleo 119 #5 Posted April 16, 2018 (edited) Your friendly Deere dealer has clutch facings that can be fitted to the WH pto with just a little ingenuity. Take your old one in hand and see what he has that might do. The thickness is not critical but you will have to decide to use a glue or rivets or both perhaps. Edited April 16, 2018 by tarcoleo Share this post Link to post Share on other sites
Skipper 1,788 #6 Posted April 17, 2018 Yeah that's what I have heard too, but the clutch on a C195 is not just a flat clutch disk like on the other models. It is a conical shape with 4 pads on. But you are correct, there is supposed to be a deere part that will fit. Just can't find it. 1 Share this post Link to post Share on other sites