squonk 48,318 #26951 Posted Saturday at 04:22 PM @Sparky is that a LED work light or one of those old school "Bulb Eater" models? This is the time of year back in the day when the droplights would get rain and snow dripping on them and the bulbs would explode. I was working at a Chevy dealership and we went thru so many bulbs they started keeping track of how many each one of us we going thru. Like we were doing it on purpose. There was one guy nobody liked so when we broke a bulb we would steal his bulb and put the bad one in it's place. So he started putting his initials on his bulbs. So we all put his initials on our bulbs so he couldn't figure out who was talking them! 2 Share this post Link to post Share on other sites
Sparky-(Admin) 26,685 #26952 Posted Saturday at 04:39 PM 2 hours ago, squonk said: @Sparky is that a LED work light or one of those old school "Bulb Eater" models? I totally know what you mean Mike!! This is a standard old bulb eater that I got sick of swapping bulbs in (including the “rough service” ones). Bought this screw in LED head, simply remove the old bulb cage and screw it in. Still has a hook 2 3 Share this post Link to post Share on other sites
Bill D 3,191 #26953 Posted Saturday at 09:27 PM 4 hours ago, Sparky said: I totally know what you mean Mike!! This is a standard old bulb eater that I got sick of swapping bulbs in (including the “rough service” ones). Bought this screw in LED head, simply remove the old bulb cage and screw it in. Still has a hook I have that same one. Great light. 1 1 Share this post Link to post Share on other sites
Bill D 3,191 #26954 Posted Saturday at 09:30 PM (edited) Made a front hitch to move the trailer I bought recently. Not as easy to install and remove as I'd like, but it works. Edited Saturday at 10:17 PM by Bill D 4 5 Share this post Link to post Share on other sites
adsm08 5,243 #26955 Posted yesterday at 02:26 AM Today we set out to rebuild the carb on the Commando. The needle has been sticking, so it will either not start for lack of fuel, or it floods. We got started, then I got pulled away for another task, and the boy finished without me. When we tried it it started to pour fuel out the carb throat right away. On a hunch I walked over to the work bench, and there were two needles sitting there. So we rolled it up into the garage, put it on the charger, and called it a day. We will fix it tomorrow. 3 Share this post Link to post Share on other sites
ebinmaine 81,123 #26956 Posted yesterday at 10:59 AM 8 hours ago, adsm08 said: Today we set out to rebuild the carb on the Commando. The needle has been sticking, so it will either not start for lack of fuel, or it floods. We got started, then I got pulled away for another task, and the boy finished without me. When we tried it it started to pour fuel out the carb throat right away. On a hunch I walked over to the work bench, and there were two needles sitting there. So we rolled it up into the garage, put it on the charger, and called it a day. We will fix it tomorrow. All in a day's learning. No worries. Everyone makes mistakes. The smart people learn from them. 2 Share this post Link to post Share on other sites
adsm08 5,243 #26957 Posted yesterday at 12:11 PM 1 hour ago, ebinmaine said: All in a day's learning. No worries. Everyone makes mistakes. The smart people learn from them. That's what I told him. He hates making mistakes but i have been telling him since he was 3 that failure is a better teacher than success. Success teaches us how to do it. Failure teaches us why why do it that way. 2 3 Share this post Link to post Share on other sites
953 nut 70,286 #26958 Posted yesterday at 03:52 PM 3 hours ago, adsm08 said: That's what I told him. He hates making mistakes but i have been telling him since he was 3 that failure is a better teacher than success. Success teaches us how to do it. Failure teaches us why why do it that way. 2 Share this post Link to post Share on other sites
pfrederi 21,292 #26959 Posted yesterday at 08:48 PM Started tear down of the 875 today. Got it at auction with a dead B&S . Put a Magnum 8 for testing hydro worked and lift worked. Going to fix her up I have a K181 S/G at the machine shop I was going to put back on a Commando 8 but it will go on this and I will be using her for trimming and tight location mowing with a 36" deck. Not sure what to do with the roller Commando 8 she was my trimming mower but the engine was smoking so she was removed form service. 8 4 Share this post Link to post Share on other sites
Handy Don 17,666 #26960 Posted 7 hours ago On 11/14/2026 at 11:22 AM, squonk said: So he started putting his initials on his bulbs. So we all put his initials on our bulbs so he couldn't figure out who was talking them! Like Hawkeye stealing Winchester’s booze and topping it off with water back to the “mark" 1 Share this post Link to post Share on other sites
squonk 48,318 #26961 Posted 3 hours ago 23 hours ago, pfrederi said: Started tear down of the 875 today. Got it at auction with a dead B&S . Put a Magnum 8 for testing hydro worked and lift worked. Going to fix her up I have a K181 S/G at the machine shop I was going to put back on a Commando 8 but it will go on this and I will be using her for trimming and tight location mowing with a 36" deck. Not sure what to do with the roller Commando 8 she was my trimming mower but the engine was smoking so she was removed form service. A hydro short frame makes a great trimmer! 2 1 Share this post Link to post Share on other sites