What have you done to your Wheel Horse today?

[Stan50 137]

Some work on new steel box for WH trailer (dump trailer). Undercarriage needed some work,but that is the base for new "dump box" , aside original platform for hauling wood (2 in 1). Materials: old 2 wheel wheelbarrow, old bed frame, scrap metal and  some new metal pieces. Fit for wooden pallet 120x80 cm.

 

 

 

My original modified patform for hauling wood, hay, grass,branches etc

 

[ML3 2,274]

On 5/3/2026 at 1:09 PM, ML3 said:

. I have manuals on all of them if you need. 

Thanks for the manuals. Pretty sure I got the recoil fixed🤞

[lynnmor 8,778]

7 hours ago, Stan50 said:

Some work on new steel box for WH trailer (dump trailer). Undercarriage needed some work,but that is the base for new "dump box" , aside original platform for hauling wood (2 in 1). Materials: old 2 wheel wheelbarrow, old bed frame, scrap metal and  some new metal pieces. Fit for wooden pallet 120x80 cm.

My original modified patform for hauling wood, hay, grass,branches etc

 

 

A couple of vertical pieces on each side would strengthen the frame considerably since both top and bottom would work in tandem.  Many store bought utility trailers use this idea.

[WHX?? 56,322]

Not mine but a customer's. Sharpen blades & change oil & check over kind of thing. Repair a busted coil bracket. 

Real nice '82 C-105 all original. So nice his one may not leave the ranch. The mafia may have to make an offer he can't refuse...   First step was a bath. 

Edited Tuesday at 08:00 PM by WHX??

[SylvanLakeWH 31,225]

@WHX?? tell your C-105 his Michigan cousin says "Cheers"...

You know you need a Black Hood in the stable... 

 

[Brockport Bill 2,312]

1 hour ago, SylvanLakeWH said:

@WHX?? tell your C-105 his Michigan cousin says "Cheers"...

You know you need a Black Hood in the stable... 

 

gotta luv the Blackhoods

[kpinnc 18,044]

2 hours ago, Brockport Bill said:

gotta luv the Blackhoods

 

My daughter has very little interest in my tractors. She like to drive them once in a while, but that's it. 

 

That being said, she really likes my black hood project. She talks about it every time she walks through the garage.

[Stan50 137]

7 hours ago, lynnmor said:

 

A couple of vertical pieces on each side would strengthen the frame considerably since both top and bottom would work in tandem.  Many store bought utility trailers use this idea.

Yes, I will do that, just I had some fun with driving in circles yesterday  

[ebinmaine 78,482]

12 hours ago, kpinnc said:

 

My daughter has very little interest in my tractors. She like to drive them once in a while, but that's it. 

 

That being said, she really likes my black hood project. She talks about it every time she walks through the garage.

 

 

 

Awesomeness

[Bill D 2,792]

12 hours ago, kpinnc said:

 

My daughter has very little interest in my tractors. She like to drive them once in a while, but that's it. 

 

That being said, she really likes my black hood project. She talks about it every time she walks through the garage.

You have to get her out in the garage to help you.  Does she like to paint?

[Thegearhead0324 1,506]

I didn’t physically do anything to the tractor today, but today I did order a trailer hitch from wheelhorsepartsandmore. I kept seeing nothing but very good things and reviews on here and few others so I bit the bullet and ordered one. I look forward to getting it and bolting it up . 

[CasaytheMann 84]

Every time my youngest daughter (30 y.o.) is in town she pulls out some overalls and asks what we're working on today? She especially loves working on my '01 Jeep Grand Cherokee, or the '85 SB I recently sold.

Edited 13 hours ago by CasaytheMann

[WHX?? 56,322]

15 hours ago, Brockport Bill said:

gotta luv the Blackhoods

I thought they was a red headed step child. Then I got one and it grew on me. Then I put solid motor mounts on and it was all over. 

[Sodaking27 1,190]

Lots of progress over the last couple days. Got the replacement motor installed in the C175. Runs like  a top.

 

 

 

Replaced the leaking axle seal on the GT1800 and finally installed its new shoes that I’ve had settling for 2 years.

 

 

 

[pfrederi 20,397]

8 minutes ago, Sodaking27 said:

Lots of progress over the last couple days. Got the replacement motor installed in the C175. Runs like  a top.

 

 

 

Replaced the leaking axle seal on the GT1800 and finally installed its new shoes that I’ve had settling for 2 years.

 

 

 

 

 

 

 

 

Is the spec number on that KT-17 24336??  It is a series 2 service engine that WH ordered I guess to replace the failed series 1 in a lot of C-175...

[Sodaking27 1,190]

33 minutes ago, pfrederi said:

 

 

Is the spec number on that KT-17 24336??  It is a series 2 service engine that WH ordered I guess to replace the failed series 1 in a lot of C-175...

Yes it is.

 

[ebinmaine 78,482]

2 hours ago, Thegearhead0324 said:

I didn’t physically do anything to the tractor today, but today I did order a trailer hitch 

 

I have a couple here in use from @76c12091520h Brian Badman. 

 

Excellent hitches. I highly recommend them.  

 

 

 

[oliver2-44 11,436]

Polished some transmission shifter balls. No before pictures, but these were really rough and faded gray.   Sanded them in drill press 180, 320, 600, 1000, 1500, 2000. 

Polished them on a buffing wheel with white rouge.   I have the drill turn the opposite of the buffing wheel. 

[kpinnc 18,044]

3 hours ago, Bill D said:

Does she like to paint?

 

She hasn't really done anything like this kind of painting, but she is a awesome sketch artist. Point being she has an eye for detail and a steady hand to go along with it. Maybe she'll learn to paint and help me a little. 

[kpinnc 18,044]

2 hours ago, WHX?? said:

thought they was a red headed step child.

 

Same here. To me at least, some looked great but most were ugly. 

 

Now that I have mine coming along I'm really liking the lines and look of it. And I've begun to appreciate others that I dismissed before. 

[ebinmaine 78,482]

59 minutes ago, oliver2-44 said:

Polished some transmission shifter balls

 

Slick!

[WHX?? 56,322]

4 hours ago, pfrederi said:

spec number on that KT-17 24336??

Does that S after 17 mean a series 2 service motor? 

[WHX?? 56,322]

Set a camera up on the cat food what to see was eating it and got this ... 

 

Well the nice thing about trail cameras is this horse pic ... 

 

 

Moved the trail cam to the asparagus field to see if deer were eating that ... It was what they call a bluebird day. 

 

 

[pfrederi 20,397]

1 hour ago, WHX?? said:

Does that S after 17 mean a series 2 service motor? 

Spec # is Series 2  Higher than 24300    Gray color indicates service motor

[lynnmor 8,778]

42 minutes ago, WHX?? said:

Set a camera up on the cat food what to see was eating it and got this ... 

 

Looks like she is eating go three.