What have you done to your Wheel Horse today?

[Chris689 158]

On 4/6/2026 at 5:14 PM, ebinmaine said:

Niiiiice work!

Thank you. I’ve been looking for a front hitch for a couple years now. I found a few on eBay a while ago but haven’t seen em on there since. I ran across the thread on here a few days ago and remembered I got a seized up mule drive with my 73 and figured it was the perfect candidate. 

[BrianKoch 369]

On 4/5/2026 at 10:23 AM, BrianKoch said:

Happy Easter Gentlemen!

 

This morning I began the process of figuring out what is leaking on the 312A’s hydro pump. Lot of cleaning ahead of me…
 

I also ordered a new motion control plate as this one is pretty wallowed out. 
 

 

Update:

 

I refilled the reservoir with SAE 30 motor oil and waited and waited and waited. Then, I noticed oil weeping out from under the cam follower arm. After looking at the parts diagram, it doesn’t appear there is a serviceable seal underneath. Anyone have more experience with this issue?

 

Also, in preparation for the upcoming replacement cam plate operation, I removed the 106661 eccentric cam and sure enough it needs replacing due to excessive wear. Grass is growing day by day. Gotta get this horse out to pasture soon!

 

Edited Wednesday at 11:19 PM by BrianKoch

[CasaytheMann 22]

I changed the oil and oil filter, and greased all 4 zircs. The recycler deflector had both bottom corners broken off, which sent grass all over the place, so I installed a piece of flooring and metal retainer to block it off. Buying a new deflector and parts for $75+ isn't in my budget at the moment. On a side note, I went down to the local Autozone to buy some sae30 oil. I didn't see any on the shelf so I asked an employee if they had any in the back warehouse. I told him I needed 2 qts. He came back with 2. When they rung it up, it showed it was 1 cent a qt. The manager said it was discontinued and they just wanted to get rid of it. I told them I'd buy whatever they had left. Walked out with 7 qts for 8 cents (sales tax was 1 cent).

[cleat 8,867]

3 hours ago, BrianKoch said:

Update:

 

I refilled the reservoir with SAE 30 motor oil and waited and waited and waited. Then, I noticed oil weeping out from under the cam follower arm. After looking at the parts diagram, it doesn’t appear there is a serviceable seal underneath. Anyone have more experience with this issue?

 

Also, in preparation for the upcoming replacement cam plate operation, I removed the 106661 eccentric cam and sure enough it needs replacing due to excessive wear. Grass is growing day by day. Gotta get this horse out to pasture soon!

 

 

Here is the parts diagram for an Eaton 1100.

I think the control shaft and seal should be the same on your Eaton 700

 

Hydro.pdf

 

For some reason they pictured it upside down.

 

The control shaft is #37 and your seal is #36

 

[rjg854 12,911]

Good day for changing oils and putting the snow blower and plow tractors away for the year. And getting the Commando 8 ready for mowing duties.

[sqrlgtr 2,395]

1 minute ago, rjg854 said:

Good day for changing oils and putting the snow blower and plow tractors away for the year. And getting the Commando 8 ready for mowing duties.

No pictures hard to prove you done anything .

[rjg854 12,911]

1 minute ago, sqrlgtr said:

No pictures hard to prove you done anything .

Pictures of dirty oil aren't really interesting are they 

[WHX?? 55,829]

25 minutes ago, rjg854 said:

Pictures of dirty oil aren't really interesting are they 

No but the red porn that dirtys that oil is...

[SylvanLakeWH 30,920]

8 minutes ago, WHX?? said:

the red porn that dirtys that oil is...

[squonk 45,886]

21 hours ago, CasaytheMann said:

I changed the oil and oil filter, and greased all 4 zircs. The recycler deflector had both bottom corners broken off, which sent grass all over the place, so I installed a piece of flooring and metal retainer to block it off. Buying a new deflector and parts for $75+ isn't in my budget at the moment. On a side note, I went down to the local Autozone to buy some sae30 oil. I didn't see any on the shelf so I asked an employee if they had any in the back warehouse. I told him I needed 2 qts. He came back with 2. When they rung it up, it showed it was 1 cent a qt. The manager said it was discontinued and they just wanted to get rid of it. I told them I'd buy whatever they had left. Walked out with 7 qts for 8 cents (sales tax was 1 cent).

Are you sure it's DETERGENT SAE 30? Seems to cheap even of they aren't going to carry it anymore. I bought a gallon of Rotella 30W at the WaWa today .

[squonk 45,886]

Today was "Get the tractors ready to mow day"  Went to the WaWa to get some Rotella 30W and a couple tubes of Red n Tacky

 

Engine Oil change, added EZ oil drain valve ,grease and blade sharpening on the 875

 

Engine Oil change, Trans oil (Mobil 1 10W40 Napa 1410 filter) grease. New battery and blade sharpening on the C-160

 

 

 

[CasaytheMann 22]

2 hours ago, squonk said:

Are you sure it's DETERGENT SAE 30? Seems to cheap even of they aren't going to carry it anymore. I bought a gallon of Rotella 30W at the WaWa today .

 

[CasaytheMann 22]

Installed a seat cover and spark plug.

 

[rjg854 12,911]

20 hours ago, WHX?? said:

No but the red porn that dirtys that oil is...

Here you go then 

The line up

73 16 Auto & C160

68 Raider 12

68 Commando

854

Edited 5 hours ago by rjg854
Sp

[sqrlgtr 2,395]

Put a little bling bling on that came from Vinyl Guy. Changed engine and hydro oil and filters and added oil filter cooling tin gasket.

Edited 5 hours ago by sqrlgtr

[sqrlgtr 2,395]

9 minutes ago, rjg854 said:

Here you go then 

The line up

now thats more like it 

[squonk 45,886]

Added adjustable seat tracks to HHHOOOWWWAAARRRDDD!!!