GAJoe 852 #18351 Posted January 29, 2023 Yesterday I started reassembly of the 36" mower deck anticipating the arrival of my seals and bearings in about 10 days. I got the belt tensioner bar bolted back on with new nylon bushings and got the wheels cleaned up, bolted back on, and replaced the grease. Today I sharpened and balanced the blades. 7 Share this post Link to post Share on other sites
GAJoe 852 #18352 Posted February 2, 2023 (edited) My mower deck bearings came in so I popped the seals off , cleaned out the grease, and repacked them with Lucas green. The seals are still a week out. I took the mule apart and went to repack the "good bearing" but upon closer inspection decided to replace both. Got the two ordered. Edited February 3, 2023 by GAJoe added details. 3 Share this post Link to post Share on other sites
R Scheer 507 #18353 Posted February 4, 2023 Replaced a defective headlight switch. I have to applaud the Wheelhorse for simplicity. 2 screws to remove the dash, 2 spade connectors to the switch, and 1 nut on the switch. You can't get it much easier. 6 1 Share this post Link to post Share on other sites