Jgoodsell 19 #1 Posted December 5, 2017 I have a 1973 wheel horse automatic 10 and the transmission belt tensioner pulley has failed. I cannot for the life of my locate the correct part number. I have reviewed the parts manual, but that is not listed anywhere. Would anyone know where I could look for this? Share this post Link to post Share on other sites
Racinbob 11,788 #2 Posted December 5, 2017 Check out page 6. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,277 #3 Posted December 5, 2017 Flat idler pulley - 3.219" OD - 2-4463 or 24463, 7434, 112426 replaced by Toro 244-63 (Napa 7-05206 with flanges, Napa 7-05434 with flanges, Rotary 722, Stens 280-081 Std Flat OD 3.000" Width 7/8" Flat width 3/4" ID 3/8") Flat idler pulley - 3.219" OD - 2-4463 or 24463, 7434, 112426 replaced by Toro 244-63 (Napa 7-05206 with flanges, Napa 7-05434 with flanges, Rotary 722, Stens 280-586 HD bearing Flat OD 3.000" Width 7/8" ID 3/8") The 2nd line includes a Stens replacement with a better quality bearing. Garry 4 Share this post Link to post Share on other sites
