dkg520 523 #1 Posted August 25, 2017 Hi guys! I just picked up this C-160 and I have a few questions. It is a 1975 and appears to be all original except the front tires. My question is what is the lower pulley that is located next to the transmission pulley for? Also the drive belt guard appears to be oversized. Are both of these designed for a attachment? It starts and runs great with no smoke. The transmission also works flawlessly. Even the headlights work! Thanks for any help. 4 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,272 #2 Posted August 25, 2017 A possibility Garry 3 Share this post Link to post Share on other sites
c-series don 9,468 #3 Posted August 25, 2017 That is definitely for the vacuum listed above. The belt runs on the outer PTO pulley. Just one more genius Wheel Horse design. 3 Share this post Link to post Share on other sites
dkg520 523 #4 Posted August 25, 2017 Yes that is what the parts are for! Thank you for all your help. 2 Share this post Link to post Share on other sites
Searcher60 209 #5 Posted August 27, 2017 It's still listed on Craig's. Good luck with it! 1 Share this post Link to post Share on other sites
Pollack Pete 2,273 #6 Posted August 27, 2017 Very nice C-160.Love those big Kohler engines.Have fun with your new toy. 1 Share this post Link to post Share on other sites
elliot ness 1,916 #7 Posted August 27, 2017 Nice score ! Share this post Link to post Share on other sites
Sarge 3,464 #8 Posted August 28, 2017 I have a '73 16Auto and '74 C-160 - you couldn't pry them out of my cold, dead fingers - unless perhaps it was a C-195 w/accessories and 3pt/pto .... Sarge Share this post Link to post Share on other sites
