BlownL67 2 #1 Posted July 4, 2017 Totally new to the Toro / Wheel Horse community so bear with me. I picked up a 520H with 48" mower, 44" blower, cab, etc... I'm in the process of replacing the neglected items and giving it a tuneup so I will be ordering parts online. I need a new drive belt, and mower deck belt too. Do I also need another PTO / mule drive belt or does the deck belt or does that route to the mule drive ? I don't have the tractor at my house now, but I was looking for a bit of help with my simple issue. Thanks! Mark 1 Share this post Link to post Share on other sites
WVHillbilly520H 10,376 #2 Posted July 4, 2017 Mower deck spindles have one belt and the engine to deck PTO belt is another, also there's an engine to transaxle drive belt, my suggestion is err on the cautious side and buy/use only TORO/WH belts as they normally last longer but others have mentioned decent use from the Blue Kevlar Huskee belts from TSC, also I'm partial to the T/WH trans filter as well as the Cummins/Onan engine oil filters but others here like the the NAPA/WIX filters, down load your model/year/attachments operators/service manuals from here for more detailed info, Jeff. Share this post Link to post Share on other sites
BlownL67 2 #3 Posted July 4, 2017 Thanks for the reply. I have the numbers for the main drive, 48" deck, but I cannot seem to find the PTO to deck belt anywhere. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,276 #4 Posted July 4, 2017 Mower belts have been added to this page Garry Share this post Link to post Share on other sites
