Bobby w 0 #1 Posted May 15, 2017 Hey wheel horse guys I'm working on my sister's 82 c-195 the clutch lining has wore off on the bell pulley.wondering if there was a conversion to a disk clutch and if anybody would know were I could get one.i tried using leather strips glued in but it doesn't last long I've used old clutch lining off a clutch disk but the epoxy don't hold up long either need suggestion please.thank you Share this post Link to post Share on other sites
953 nut 58,299 #2 Posted May 15, 2017 Check out this thread about relining a clutch. Share this post Link to post Share on other sites
elcamino/wheelhorse 9,360 #3 Posted May 15, 2017 @Bobby w If you find a lining material for the clutch let us know. I think there are quite a few of us need the material , but haven't found it at an affordable price. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,277 #4 Posted May 16, 2017 Is this a cone clutch? Many years ago used a woven lining in sheet form and cut to a pattern that was made from the drum. The adhesive at the time was nasty but suspect today's polyurethane adhesives would work. This was for some type of chain drive in a sawmill that made Red Deer maple hardwood flooring. Garry 1 Share this post Link to post Share on other sites
Aldon 4,828 #6 Posted May 16, 2017 It is a cone clutch. Not like the rest of the Cseries. Your not going to find a replacement. you will need to take it to some commercial relining places. A guy found a place out in Ohio/Indiana area that did his so I know it can be done. Share this post Link to post Share on other sites
