stanpjr 12 #1 Posted April 30, 2017 I have a rl 367 deck I need to change the belts on that drive the blades. Any advice how to do it easily. Can not seem to find any posts on this topic. Any help would be appreciated. Share this post Link to post Share on other sites
Racinbob 11,938 #2 Posted April 30, 2017 Here's the manual with the parts list. There's really no shortcut. You just have to take things apart until the belts are free. It's not difficult at all but just takes a little time. 1 Share this post Link to post Share on other sites
rjg854 12,210 #3 Posted April 30, 2017 I agree with Racinbob, there's no easy quick way to change the belts. It just takes some time and some patience. Just did a 36" deck myself a month or so ago. It's a good time to clean all the old grease up and get it ready for the mowing season. Crank up some good tunes and go for it, it's not difficult. 1 Share this post Link to post Share on other sites
stanpjr 12 #4 Posted April 30, 2017 Thanks for the info just wanted to make sure there wasn't something I was not seeing.Usally most stuff to do on these tractorsis pretty easy.l'll give it a go this week. 1 Share this post Link to post Share on other sites
stanpjr 12 #5 Posted May 1, 2017 Got the belts off, you guys were right,was not that bad. Had to cut the nuts off the bolts that hold the drag link down.New bolts and belts and I am ready to go.Thankyou again. Share this post Link to post Share on other sites
rjg854 12,210 #6 Posted May 1, 2017 Happy to hear it went well for you. Most times it's getting started that's the tuffest thing to do. Share this post Link to post Share on other sites
dgrondy 3 #7 Posted June 17, 2020 (edited) Thanks Edited June 17, 2020 by dgrondy have answer Share this post Link to post Share on other sites
