Are all 70's era plows created equal?

[Oldarmy 113]

I have been keeping my eye out for a plow and frame setup for my 77 B80. I have actually seen a couple show up recently on C-list but they all look the same to me. They have no real information in the listing other than saying off of a Wheel Horse. So, question is are they the same other than width of blade ? If not what do I need to know to make sure it will fit my horse. Anything else I need to know about these like frame width/length etc. before I go stepping in it.

[varosd 1,185]

 

[Oldarmy 113]

9 hours ago, varosd said:

Thanks, I did find that thread in a search but I was hoping to find some dimensions as to which units are compatible.  

 

[Oldarmy 113]

So I have been researching my own question and found this PDF file which lists all the attachments and interchangeability. Thought this was a good find and If someone wants to add this to the brain trust please do so.   

AA_WH_Interchange wheel horse attachments list.pdf

 

Opps, looks like it is already here on the site. Should have looked more closely.

Edited April 7, 2017 by Oldarmy

[gwest_ca-(File Mod) 11,764]

That list is good but leaves out many models. It lists the model for a given year, the model that replaced the original and the model available when the list was written It leaves out models between the last two.

I went through it to fill in the missing models. Notice they went from 42" to 48" wide.

Dozer 1977 42in model 76-42BC01 Complete

Fits long and short frame tractors
 

DNA

76-42BC01 replaces BD-426, BD-4264A, BD-4267, 6-1111, 6-2111, 6-4111 [6-4112 & 6-9621], [6-4113 & 6-9622], [6-4113 & 6-9623], [6-4114 & 6-9624], 6-2131, 6-2132, 6-2133, 66-42BC01

76-42BC01 replaced by 86-42BC01, 96-42BC01, 06-42BC01, 06-42BC02, 06-48BC01, 06-48BC02, 06-48BC03, 79350 and 79364

 

Garry

[Oldarmy 113]

2 hours ago, gwest_ca said:

That list is good but leaves out many models. It lists the model for a given year, the model that replaced the original and the model available when the list was written It leaves out models between the last two.

I went through it to fill in the missing models. Notice they went from 42" to 48" wide.

Dozer 1977 42in model 76-42BC01 Complete

Fits long and short frame tractors
 

DNA

76-42BC01 replaces BD-426, BD-4264A, BD-4267, 6-1111, 6-2111, 6-4111 [6-4112 & 6-9621], [6-4113 & 6-9622], [6-4113 & 6-9623], [6-4114 & 6-9624], 6-2131, 6-2132, 6-2133, 66-42BC01

76-42BC01 replaced by 86-42BC01, 96-42BC01, 06-42BC01, 06-42BC02, 06-48BC01, 06-48BC02, 06-48BC03, 79350 and 79364

 

Garry

Thanks for that info Garry. Am I right in thinking my 77 B80 is a long frame. Was that not one of the things they changed in 76-77 as well as the 8 speed vs. 4 speed?

[gwest_ca-(File Mod) 11,764]

Yes the 1977 B-80 is a long frame.

 

Garry