12 hp Kohler 1,020 #1 Posted March 4, 2017 (edited) I have an old kohler k301t engine from a tractor I got a couple of weeks ago.It has a hole in the engine block that water has been getting into for years. I was woundering if the engine would be worth fixing or should I just find another? engine is a 12hp kohler pull start. Sorry I don't have any pictures right now but I'm sure you get the idea that it's rough because it has a hole in the engine block. Edited March 4, 2017 by 12 hp Kohler Share this post Link to post Share on other sites
Rob R 977 #2 Posted March 4, 2017 In my humble opinion you NEED to start with a good block, find another good one and if the internals are rusted same applies. Share this post Link to post Share on other sites
12 hp Kohler 1,020 #3 Posted March 4, 2017 Ok thanks for the info Share this post Link to post Share on other sites
can whlvr 994 #4 Posted March 5, 2017 I agree too,too much hassle to try and fix it,if it even possible Share this post Link to post Share on other sites
ericj 1,579 #5 Posted March 5, 2017 i have a rebuild able 12 hp block if you would be interested, pm me eric j Share this post Link to post Share on other sites
12 hp Kohler 1,020 #6 Posted March 5, 2017 Ok, thanks Share this post Link to post Share on other sites
