Dan693 510 #1 Posted February 13, 2017 Getting ready to start my LR resto and thought it would be nice to have a way to lift the wheels off of the ground. After thinking about several ideas like lift tables, hoists, etc I decided to keep it simple (and cheap). I had an extra 2x6 from a job and a piece of black pipe. This is what I came up with.......raises either end up 4 inches with a push of the handle and works great. 13 Share this post Link to post Share on other sites
953 nut 54,843 #2 Posted February 13, 2017 Great idea, simple solution to a problem at a minimal cost! Share this post Link to post Share on other sites
Sarge 3,462 #3 Posted February 13, 2017 The most overlooked and oldest rule of leverage/lifting - lever and fulcrum , easy to forget or overlook the simple stuff . Sarge 1 Share this post Link to post Share on other sites
JC 1965 1,530 #4 Posted February 13, 2017 Very handy idea, Thanks for sharing. Share this post Link to post Share on other sites
Dan693 510 #5 Posted February 13, 2017 I actually tilted the fork arms back 5 degrees to ensure it would sit firmly on the support box......check! 1 Share this post Link to post Share on other sites
cafoose 3,354 #6 Posted February 13, 2017 Can you post more detail on measurements, materials, and how it works? Share this post Link to post Share on other sites
