Dan693 510 #1 Posted February 3, 2017 Hey All, I took the flywheel off of my Tech HH60 and noticed several of the magnets (there are 12 of them) had become dislodged. It was all crusty in the flywheel so I took all the mags out and cleaned everything up. Now I read that I cant just replace the mags in any position but some sort of north/south pole configuration. Any one have more info on this process?......also whats the best way to re-glue them in place? Thanks! Share this post Link to post Share on other sites
AMC RULES 37,196 #2 Posted February 3, 2017 Simple fix, two part epoxy them back into place. Share this post Link to post Share on other sites
Dan693 510 #3 Posted February 3, 2017 I think I misstated.....I just took the metal pieces off and not the magnets themselves so I guess I can just re-glue 2 metal pieces on to each magnet. Thanks! Share this post Link to post Share on other sites
