carlosking450 158 #1 Posted January 15, 2017 Hello everyone from Spain, I have a 702 wheel horse and the frame is with many welds and in poor condition and looked at by ebay and seen a frame of a 633 wheel horse but I do not know if it looks the same but I'm not sure, someone Can you tell if it's the same or not? Thanks to everyone! 1 Share this post Link to post Share on other sites
stevasaurus 23,296 #2 Posted January 15, 2017 Carlos, I looked at the manuals for the 702 and the 633. The frames are different part numbers, but it is not listed as "frame"...it is listed as "frame assemblies" . The picture of the frame in both manuals is the same picture. I would say that you could interchange the frames from those two horses. You might have to drill another hole or 2, but they could even be the same. The dimensions of the 2 horses are the same. Hopefully, somebody that really knows will chime in. 1 Share this post Link to post Share on other sites
carlosking450 158 #3 Posted January 15, 2017 Hello friend also look at the manual and I saw that it was not the same part number, but seeing the two frames are almost the same not to say they are the same.much thanks friend 1 Share this post Link to post Share on other sites
Elkskin's mower junkyard 1,117 #4 Posted January 15, 2017 the front axles are different. in 63 they changed axle designs to improve steering and make it turn sharper. Share this post Link to post Share on other sites
carlosking450 158 #5 Posted February 19, 2017 Hello friends finally buy the picture for my 702 and confirm that the 633 is valid for my 702, I have been lucky because it is in perfect condition. 1 Share this post Link to post Share on other sites
stevasaurus 23,296 #6 Posted February 19, 2017 That is excellent news Carlos. Share this post Link to post Share on other sites
