slight mod for snow blade lift

[steve k 82]

This may have been discussed before but I thought I would share.   The link that lifts the plow on my electro 12 was a solid piece of steel and pushing snow across the yard was difficult without scalping the high spots so I replace the solid bar with chain. This allows the blade to float up and down with uneven ground.  The blade is heavy enough that it does not lift up and ride on the snow it works good.  Saves work in the spring. 

[daveoman1966 3,839]

IMHO... I likke the solid link just to cut into hard-pack and ice.   

Edited December 16, 2016 by daveoman1966

[857 horse 2,588]

 

I'm happy  when the engine starts !!!!!

 

[Tankman 3,523]

I've only used solid blade lift links. Never had a problem other than getting dressed to go outdoors.

Have to shovel the wet white nasty stuff to open my outward swing barn doors. Try shoveling nasty white stuff and guzzlin' coffee at the same time!