Wishin4a416 2,189 #1 Posted October 30, 2016 Was wondering if anyone had pictures of their handy work and location on the belt guard mod to improve air flow on the rear cylinder. I will do mine in the Spring before mowing season. Thanks Jack 1 Share this post Link to post Share on other sites
N3PUY 1,031 #2 Posted October 30, 2016 Required a pencil, a combination square and a step drill bit. 7 Share this post Link to post Share on other sites
JAinVA 4,619 #3 Posted October 30, 2016 Heres mine Jack the image I really wanted you to see is this one.I personally believe that shortening the belt guard support does more than the holes.When you look at the thing straight on the bracket covers more of the cooling fins than the belt guard does.JAinVA 6 Share this post Link to post Share on other sites
Wishin4a416 2,189 #5 Posted October 30, 2016 Thanks guys and Thanks Craig. I dont believe I ever saw that thread. 1 Share this post Link to post Share on other sites
Ed Kennell 36,145 #6 Posted October 30, 2016 Jack, if you look closely at the pic of my guard venting on the thread that Craig pasted, you will see the housing I made to collect the back cyl heat and pump it into the cab. To give you an idea of the amount of heat this produces, the cab stays ~40 F warmer that the outside temp. 4 Share this post Link to post Share on other sites
benji756 341 #7 Posted October 31, 2016 Heres my version, i bought a stainless steel vent from a marine supply company. 2 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,487 #8 Posted November 1, 2016 Always liked the venting talk. the best part I like is using the hot air for heating the cab in the winter. Glenn 2 Share this post Link to post Share on other sites
