6wheeler 669 #1 Posted October 5, 2016 (edited) Hi all. No response to the ad I put in wanted section yet. So, Can anyone tell me how long the clevis is on the lift cylinder on a C-160 automatic? It threads onto the piston end and pins onto the lift arm assembly. I can probably make one. But, I don't know how long it is. It isn't available from the dealer and the parts list doesn't show the length of it. Thanks in advance.. Pat Edited October 5, 2016 by 6wheeler Share this post Link to post Share on other sites
RJR49 138 #2 Posted October 6, 2016 I'll measure mine for you if you'll send me a picture of the fitting it goes in but you should be able to find one at a hardware store 1 Share this post Link to post Share on other sites
6wheeler 669 #3 Posted October 15, 2016 Sorry I hadn't gotten back sooner. We are very busy this time of year. Don't have alot of time to visit right now. The part I am looking for? At the rear end of your lift cylinder (towards the rear) will be a clevis that hooks up to the lift arm assembly. My 160 is missing that clevis. It should have threads on the piston rod at the end towards the rear. I am sorry. I am not very good at posting pics. But, the clevis is all that is missing. The cylinder works fine and the lift arm assembly is complete. I just need the clevis. Or at least the length of it so I can find one to fit. I really appreciate your help. Together? We could make this run. Pat Share this post Link to post Share on other sites
