toro/wheelhorse plow info

[stevebo-(Moderator) 8,590]

guys,

who here would know what tractor this toro/wheelhorse plow would fit??

part# 79252

it does not look like a reg. long frame and it has a tailpiece extension and offset angle handle like it may fit a 520???

[Nick 13]

Could be wrong but i think your looking at a vert plow frame. The later Toro Verts like the 260 used what looked like a normal plow fame but at the back it had flat stock welded in making it look kind of like the extended 520 plow frames.

[stevebo-(Moderator) 8,590]

Nick,

it comes with a black rounded style bracket that attaches to the rear end.

[mcwh1950 2]

hope this help

79252, 48" Snow Blade, 260 Series Lawn and Garden Tractors, 1996 (SN 6900001-6999999)

79252, 48" Snow Blade, 260 Series Lawn and Garden Tractors, 1997 (SN 7900001-7999999)

79252, 48" Snow Blade, 260 Series Lawn and Garden Tractors, 1998 (SN 8900001-8999999)

79252, 48" Snow Blade, 260 Series Yard Tractors, 1994 (SN 4900001-4999999)

79252, 48" Snow Blade, 260 Series Yard Tractors, 1995 (SN 5900001-5999999)

[PoconoEagle 0]

guys,

who here would know what tractor this toro/wheelhorse plow would fit??

part# 79252

it does not look like a reg. long frame and it has a tailpiece extension and offset angle handle like it may fit a 520???

Thats the one with the broken spring. I too looked and yes a vertical

[PoconoEagle 0]

Thats the one with the broken spring. I too looked and yes a vertical

I just talked with the seller John and we compared measurements. My B-100 diff mount is too narrow. this frame measures approx 12 1/4" wide at the rear mounting pin . The large square diff bracket is 13+" at the wide part. It appears in excellent condition cept for a broken spring and the 150 price is good in my opinion. here are the pics he sent me. If no one wants it I will take it and modify it . Figured Id give someone a chance at a bolt on oppertunity!

Guess i need to figure out how to post pics...

[Duff 206]

Try this link for photo posting!

http://www.wheelhorseforum.com/index.php?showtopic=1071

Duff :D

[PoconoEagle 0]

Try this link for photo posting!

http://www.wheelhorseforum.com/index.php?showtopic=1071

Duff

Thanks! that wasnt to hard. although I think there was a bit of luck involved!! :hide:

[C-Series14 15]

Just for info, I have been using a 79252 blade on my C-Series for quite awhile so it will work. I must have gotten the rear mount with it, don't remember. It does have a system on the forward part that was used to lift and lower the blade so you will have to attach a mid mount to the blade to lift it with your tractors mid lift. I left the front mount on and it attached to the front tach-a-matic but it would bind up every now and then so I took it off...

I did change out the angle arm cause it was a pin in the butt to reach!!! :hide:

[PoconoEagle 0]

Well guess my MillerMatic will get some use now....

maybe it wont snow any more this year??

[C-Series14 15]

Heck, I haven't even put my blade on yet! I still have the front mounted generator and grader blade on the plow tractor!!! :hide: