Dhodge 528 #1 Posted June 14, 2016 I have oil blowing out of the oil pump pressure sensing module located near the dip stick. I will be preparing to tear into things tonight. Anyone have any experience here? Not sure what goes bad here yet that causes oil to blow by. Any tips before I tear into things is appreciated. Share this post Link to post Share on other sites
pfrederi 18,703 #2 Posted June 14, 2016 Most likely you will need a new sending unit. I had one fail it was spraying oil out the plastic center of it had cracked. 1 Share this post Link to post Share on other sites
Dhodge 528 #3 Posted June 14, 2016 Looks automotive. Probably get one at NAPA Share this post Link to post Share on other sites
