bcoco 0 #1 Posted June 12, 2016 can someone tell me if the mower blades on the rmr3661 deck are suppose to go upward from the spindle or downward? right now they drop downward from the spindle's and thats how i keep attaching them. But its '61 so anything could have happened in the years before i took ownership. thanks bob Share this post Link to post Share on other sites
N3PUY 1,031 #2 Posted June 12, 2016 Blade goes on the bottom of the spindle .... belt goes on the top of the spindle. Blades curve "upward from the ground". 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,512 #3 Posted June 12, 2016 Manual Garry Share this post Link to post Share on other sites
bcoco 0 #4 Posted June 15, 2016 ok you say blades curve upward from ground, but in the pdf breakdown it looks like they are curving downward. or that is just a drawing? bob Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,512 #5 Posted June 15, 2016 It is just a drawing and likely older that the blades that are provided today but I don't see it the way you do. The sharpened side faces up but get them on the correct side because there is a left and a right. Garry Share this post Link to post Share on other sites
bcoco 0 #6 Posted June 20, 2016 thanks i do have them on correct sides appreciate the info bob Share this post Link to post Share on other sites
