RedRanger 1,468 #1 Posted May 10, 2016 What is the axle diameter for a Charger 10? I'm looking at a pair of 5 bolt hubs from a Charger 10, but the seller can't tell me what diameter of the hole is? Thanks! 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #2 Posted May 10, 2016 1969 Charger 10 model 1-7041 uses 1-1/8" axle seals. 1972 Charger 10 model 1-0410 uses 1" axle seals. Garry Share this post Link to post Share on other sites
RedRanger 1,468 #3 Posted May 10, 2016 Ha. That doesn't help then. lol ok- Casting numbers 105762 and 105763. Are those 1" or 1-1/8"? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #4 Posted May 10, 2016 105762 https://www.partstree.com/parts/toro/parts/93-3659-03/ 105763 https://www.partstree.com/parts/toro/parts/105763-03/ Don't think I would trust casting numbers because after they are cast they could be bored to match both axle sizes. Garry Share this post Link to post Share on other sites
RedRanger 1,468 #5 Posted May 10, 2016 Agree. I just read that in another post. Same casting was used for both parts. Just machined different. Thank you for your help. Just going to have to get the seller to actually measure them. Share this post Link to post Share on other sites
