1975wheelhorsec160 0 #1 Posted May 4, 2016 Hello everyone I just recently rebuilt my k341 for my c160 and it started for the first time tonight. So I'm pretty happy because it's the first one I ever did and it runs. But now for the bad news it is leaking oil out very bad from behind the drive pulley I believe it's the seal can I change that from the outside and is there anything I can look for specifically Share this post Link to post Share on other sites
oldredrider 2,553 #2 Posted May 4, 2016 You can pick out the seal from the outside or drive another seal over the existing one. Set it slightly below flush with the block boss and it should be good to go. Share this post Link to post Share on other sites
1975wheelhorsec160 0 #3 Posted May 4, 2016 Thank you very much you just put my mind at ease IL let you know how it goes Share this post Link to post Share on other sites