Horse Fanatic 49 #1 Posted December 14, 2008 How long is the lift bar for the 50" grader blade. I found one but it's lacking that part, I'll probably have to make a replacement. Thanks, Glenn Share this post Link to post Share on other sites
C-Series14 15 #2 Posted December 14, 2008 Well, I was hoping someone would of answered ya by now so I threw on the boots and headed out to the freezing barn and measured mine. It is 24" long, has a small bend forward at the bottom of the handle. Probably about 5" from the bottom, didn't measure that. Share this post Link to post Share on other sites
awd 0 #3 Posted December 14, 2008 How long is the lift bar for the 50" grader blade. I found one but it's lacking that part, I'll probably have to make a replacement. Thanks, Glenn You can order the part if you need it. I can email you the parts list for the 79356 50" grader blade if you need it. Share this post Link to post Share on other sites
Horse Fanatic 49 #4 Posted December 15, 2008 Thanks for the responses and to C-series for braving the cold. I wasn't aware it's still available, I'll have to try that first. Thanks, Glenn Share this post Link to post Share on other sites
Horse Fanatic 49 #5 Posted December 15, 2008 Mine is a 97 blade, a 79351. Are you aware if the lift bar #92-0983 is still available? Share this post Link to post Share on other sites
Duff 206 #6 Posted December 15, 2008 Mine is a 97 blade, a 79351. Are you aware if the lift bar #92-0983 is still available? Yes it is. Jack's Small Engines has them for $35.25. A little pricey, but still around to be had! Duff :hide: Share this post Link to post Share on other sites
Horse Fanatic 49 #7 Posted December 15, 2008 Oh, and to clarify what measurement I need, it's the bar that connects the blade to the bellcrank. Thanks, Glenn Share this post Link to post Share on other sites
C-Series14 15 #8 Posted December 15, 2008 Ok, I was wrong, I measured the angle lever!!! You want the link that lifts the blade.... Share this post Link to post Share on other sites
C-Series14 15 #9 Posted December 15, 2008 Well, I went back out in that horribly cold pole barn and measured the lift link....it is 12.5" overall and pin center to pin center is 11.5". Seriously, it is awesome outside, I work outside on airplanes!!! :hide: Share this post Link to post Share on other sites
Horse Fanatic 49 #10 Posted December 16, 2008 Thanks Mike! Share this post Link to post Share on other sites