Aldon 4,828 #1 Posted April 12, 2016 Has anyone successfully added the attach-a-matic brackets to a GT14? If so I would appreciate some measurements. Share this post Link to post Share on other sites
953 nut 60,326 #2 Posted April 12, 2016 Found this photo in the Gallery, open it in Paintbrush and it should give you a good idea where to mount it. 1 Share this post Link to post Share on other sites
Aldon 4,828 #3 Posted April 12, 2016 4 minutes ago, 953 nut said: Found this photo in the Gallery, open it in Paintbrush and it should give you a good idea where to mount it. I guess I should have been more articulate or clear. I plan on changing over to newer attach-a-matic version. I really dislike the machination one must go through using the original set up. I can handle swapping attachments currently but I know in 10 years I will not want to go through the hassle to swap the deck using that antiquated set up. I have the new style brackets and was hoping someone else had modified one of the older large frame tractors to the newer system. If not, I'll be documenting the process but trial and error will eat up precious time. Share this post Link to post Share on other sites
Aldon 4,828 #4 Posted April 12, 2016 I plan on attaching mid mounts and depending on where on the frame that it ends up necessary to have deck articulation work and clear the wheels will determine whether I can use the old style mule or if I also have to rig a new version front attach-a-matic to accept a newer mule. I have also thought I might use a C195 style side pulley with a single pulley mule. A lot of variables which I am hoping someone else has done the leg work on.bpulled the pics off fleabay 1 Share this post Link to post Share on other sites
Aldon 4,828 #5 Posted April 16, 2016 For posterity purposes and should someone locate this thread by searching.... I made some headway. For details see the thread Project Lazarus. Share this post Link to post Share on other sites
