joebob 45 #1 Posted December 13, 2008 I have a couple of gas tanks that need repairs done to them, where the hoods mount, and I was wonder how most of you have repaired them in the past, do you split the cases and weld them or ? I would like to tig them if a can just dont know if its the right thing to do or possible ,I have never split these before what are they sealed with ?? Share this post Link to post Share on other sites
sorekiwi 761 #2 Posted December 13, 2008 I have a couple of gas tanks that need repairs done to them, where the hoods mount, and I was wonder how most of you have repaired them in the past, do you split the cases and weld them or ? Share this post Link to post Share on other sites
joebob 45 #3 Posted December 13, 2008 Thanks I just bit the bullit and went for it , and after looking closer I noticed the years were differant, and I had both in my hands before I started I welded in 1/2" pieces so there should be plenty to drill and tap to for the hood mount, I also filled a switch hole in the front dash panel, now I just need to finish and throw one of the decal guys decal on there Share this post Link to post Share on other sites
TJ 171 #4 Posted December 14, 2008 Looks like you did a good job. :hide: Share this post Link to post Share on other sites