JAinVA 4,638 #1 Posted March 22, 2016 As promised, pictures of the new 312-A and my helper. 11 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,362 #2 Posted March 22, 2016 Looks like the 312 could use a few part. Your missus is great unpacks the truck and working winch , could not ask for more unless it is another 5 Share this post Link to post Share on other sites
AMC RULES 37,196 #3 Posted March 22, 2016 Are you kidding me... I've got riggers who can't tie down equipment like that. 6 Share this post Link to post Share on other sites
JAinVA 4,638 #4 Posted March 22, 2016 In the backround of the first photo is the reason momma lets me use her truck.She has seen how much I can get on the 350 and figures her truck is a type of fuse.As far as the missing parts go,the 312 will be the basis of a project I will call the dark horse.JimAnderson 4 Share this post Link to post Share on other sites
312Hydro 474 #5 Posted March 22, 2016 Wow, nice haul but your going to need to step it up a bit to keep up with the haulers on this forum! Just some quick figuring and you should have been able to load another 5 side by side and one hangin out the truck bed! Cuts down on the cost per Wheelhorse that way! Just kidding,so many possibilities with that Wheelhorse. You know you have a great wife when she hauls with her truck! Have to show this to my wife. Thanks for posting. 4 Share this post Link to post Share on other sites
JAinVA 4,638 #6 Posted March 22, 2016 (edited) 312Hydro, I am going to stop hauling them home.I truly believe they reproduce like rabbits,just let the sun go down and presto. JimAnderson Edited March 22, 2016 by JAinVA 3 Share this post Link to post Share on other sites
312Hydro 474 #7 Posted March 22, 2016 28 minutes ago, JAinVA said: 312Hydro, I am going to stop hauling them home.I truly believe they reproduce like rabbits,just let the sun go down and presto. JimAnderson Ah,if only that were true Jim! I've had the 2 hydros for a couple of years in the garage together, but so far no little red ponies! 3 Share this post Link to post Share on other sites
Tankman 3,523 #8 Posted March 22, 2016 Somehow, someway, those Horses reproduce and if not just, followed me home. The oldest story in the books. Ask Tonto and the Lone Ranger! They know! 2 Share this post Link to post Share on other sites
Wishin4a416 2,191 #9 Posted March 22, 2016 Lots of good parts left there and always nice to have a helper too! 2 Share this post Link to post Share on other sites
JAinVA 4,638 #10 Posted March 22, 2016 Jack, For $85.00 I couldn't let this go.My 416-8 was rode hard and put up wet many times.The upper dash panel has severe cracks on both lower corners,the hood stand had broken ears at the rear and was poorly repaired.I plan on using this frame,install a gear reduction steering and rebuild the 416 from this frame up.I hope to keep the tractor off line for the least amount of time but still get it nice.JAinVA JimAnderson Gloucester,Va 6 Share this post Link to post Share on other sites
Wishin4a416 2,191 #11 Posted March 22, 2016 1 hour ago, JAinVA said: Jack, For $85.00 I couldn't let this go.My 416-8 was rode hard and put up wet many times.The upper dash panel has severe cracks on both lower corners,the hood stand had broken ears at the rear and was poorly repaired.I plan on using this frame,install a gear reduction steering and rebuild the 416 from this frame up.I hope to keep the tractor off line for the least amount of time but still get it nice.JAinVA JimAnderson Gloucester,Va I know what you mean about the broken hood stand. Mine is broke on my 312 but I repaired with heavier angle iron. And I have parted out a couple 400 series and had bad upper dashes. Its nice to have that stuff in your inventory. 2 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,362 #12 Posted March 22, 2016 Now every body is bragging about pieces and parts next there will be pictures of clean garages with shelves for your goodies and probably inventory sheets. Share this post Link to post Share on other sites