Jump to content
DennisThornton

Which is bigger? 314 or 265?

Recommended Posts

DennisThornton

Surprised me!  Going through the brochure that came along with my 522XI I noticed this:

                            314    265
Horse Power         14    15
Rear tires        23x8.5    23x10.5
Wheelbase         45.5    49.5
Length                  65    69.2
Weight               610    616
Fuel tank          2.25    4.0
Turning Radius    32"  vs  16"  (thought this was interesting as well)

And the 265 will take all the comparable attachments listed for the 314, except for a mid-mount blade, including a 2 stage blower and a tiller!

 

Changes my thoughts about the 200 series!

  • Like 1

Share this post


Link to post
Share on other sites
 
Martin

Aren't the 200 series vertical shaft tractors? Im not familiar with the 200 series, but i think they are a completely different animal than the 300 series. Don't think that many attachments would interchange.

  • Like 1

Share this post


Link to post
Share on other sites
 
doc724

Yes, they are vertical shaft machines.  I think all of the newer machines, including the xi series and big box store mowers have sharper turning radius.  Although some folks like the 200 series machines, they do not seem to hold as much appeal to collectors or hold their value as well-just an observation, not a statistical analysis.

Share this post


Link to post
Share on other sites
 
squonk

Yes 200's are vertical and attachments are different. I had a 210-H for 20 yrs. Very dependable! 

  • Like 1

Share this post


Link to post
Share on other sites
 
shallowwatersailor

It seems that there is some interchangeability. The 265-6 morphed into the 417XT

 

http://www.wheelhorseforum.com/topic/34972-toro-wheel-horse-416xt/

Edited by shallowwatersailor

Share this post


Link to post
Share on other sites
 
DennisThornton

"We" here seem to have little interest in the 200 series but the more I read the more I would consider the later models if I could find a bargain.  Odd thing is around here the folks selling them don't seem to be very motivated.  Quite pricey and for reasons I've yet to fully understand.  I can see someone wanting one but why would anyone pay more for one?  Really, i, this area the asking prices are right up there, even with the vertical shaft, weaker axles and scarcity of attachments...  Of course the bigger ones are also newer compared to many of my herd...

Share this post


Link to post
Share on other sites
 
slammer302

Their is two 268 hydros for sale on my local CL one is 500 missing hood but is supposed to work great with 48" deck and the other is 300$ needs a starter and comes with a 48" deck the look like decent mowers and supposed to weigh around 700 pounds but they just don't seem to fit a need in my herd but wouldn't mind getting my hands on one of those 48" decks and converting them to work on one of my older horses

Share this post


Link to post
Share on other sites
 
wh500special

It may seem like splitting hairs, but a 265 isn't really a 200-series. It's a 260 series.  Meant to serve duty as a "yard" tractor or lightweight garden tractor.   They can do almost everything a 300+ series could except take ground engaging attachments (plow, disc, etc) and a loader.   A tiller was available.  

 

They're actually quite durable and heavy.   Based on the earlier 240 series.  They do have softer transaxles than th classic wh gt, but that's kind of qualitative since the cast iron unidrive tends to be as reliable and tough as a stone fence.  

 

True 200 series tractors (211, 212, 208, etc) are lawn tractors.   Basically on par with big box lawn tractors (but better).  Replace that second digit with  4, 5, 6, or 7 and you've stepped up a class. 

 

As mowing machines go, they're better than a classic in my book.   You can turn one around inside the circle made by a 314.   

 

Everybody needs one...

 

and i I know this guy who'd like to sell a few...

 

steve. 

 

 

 

 

  • Like 2

Share this post


Link to post
Share on other sites
 
JAinVA

The snowblower for the 260 uses the same basic housing as the 4200 series.Same auger(different part number) and the same tall chute.I am in the process of converting

a pristine 260 blower I scored for $80.00 to work on one of my 400 series tractors.I will post pictures of the conversion when I finish it.JAinVA

Share this post


Link to post
Share on other sites
 
DennisThornton
4 hours ago, slammer302 said:

Their is two 268 hydros for sale on my local CL one is 500 missing hood but is supposed to work great with 48" deck and the other is 300$ needs a starter and comes with a 48" deck the look like decent mowers and supposed to weigh around 700 pounds but they just don't seem to fit a need in my herd but wouldn't mind getting my hands on one of those 48" decks and converting them to work on one of my older horses

Both sound like bargains, especially compared to what I've seen around here.  I could use another spare rider with a 48" deck.

  • Like 1

Share this post


Link to post
Share on other sites
 
doc724

Hey Dennis, if you want to take a field trip to Barrington RI, there is currently a 265 on RI CL with a plow and dozer blade-$425.  Barrington is a well to do RI community with small lots.  I would no think it got much exercise

Share this post


Link to post
Share on other sites
 
DennisThornton
1 hour ago, doc724 said:

Hey Dennis, if you want to take a field trip to Barrington RI, there is currently a 265 on RI CL with a plow and dozer blade-$425.  Barrington is a well to do RI community with small lots.  I would no think it got much exercise

 

Sounds like a good deal, but I was just sharing some specs.  Still not looking for any 200 series but up 'till recently I didn't think any of the 200 series had much to offer.  I'm thinking maybe some do!

Share this post


Link to post
Share on other sites
 
DennisThornton

Just reviewing a bit and rereading this older thread.  I did find a bargain and I am now a proud owner of a 264 with a snow blower and deck.  I really think they are underrated and quite worthy of a second look!  Thanks for all the favorable comments or I would have passed on this fine WH!

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...