Dennys502 244 #1 Posted January 26, 2016 (edited) I don't have a snowblower on my garden tractors - this is what I use. 46" snowblower made from 3 different brands. The augers are from a 44" 2 stage Toro and I don't remember what the housing is from. I took this video to see what I could do to improve it. Looks like its pushing a lot of snow in the middle so I will have to address that first. I Think I'm going to make a new housing for it with small wings on the sides so I don't leave a trail next to it. The discharge chute needs some work too. Other than that it moves the snow good. I have a trail back to the back of the property that is about a half mile long and about 20 feet wide so this works better than the garden tractor would. I've got 4 wheel motors on the dingo so I don't have to worry about traction. MVI_0002.MP4 Edited January 26, 2016 by Dennys502 2 Share this post Link to post Share on other sites
elcamino/wheelhorse 9,062 #2 Posted January 27, 2016 Great Video . Do you have any photos of your monster? 1 Share this post Link to post Share on other sites
AMC RULES 36,945 #3 Posted January 27, 2016 A beastly creation... looks like all it needs is one of these. 1 Share this post Link to post Share on other sites
DennisThornton 4,769 #4 Posted January 28, 2016 Wouldn't mind seeing a lot more about its creation and future! 2 Share this post Link to post Share on other sites
ericj 1,576 #5 Posted January 30, 2016 if i go too fast my 44" 2 stage blower will push snow like that also, i just slow down and it does ok then eric j Share this post Link to post Share on other sites
WNYPCRepair 1,875 #6 Posted January 30, 2016 That's pretty cool Share this post Link to post Share on other sites