WNYPCRepair 1,875 #26 Posted January 6, 2016 I think the chains might do it, as it looks like the left side is off the jack stands. I would also leave the pressure on overnight and see if it straightens out more with constant pressure Share this post Link to post Share on other sites
TDF5G 2,051 #27 Posted January 6, 2016 I would think the bigger floor jack would work if you used a block of wood or something to push on the tube shaft directly. In the pic it looks like the jack is under the auger blades. 1 Share this post Link to post Share on other sites
psalms83:18 174 #28 Posted January 6, 2016 I did leave it under pressure for the night and overall corrected about 1/8 of the bend. I put it on and she still shook..but better than it was then I welded two 1\2" x 1" x 1\4" steel to where I could best estimate the offset of the bend and now she wiggles when engaged but steadies out at full speed...even when it in the air! sorry I painted it before I thought to take a pic WP_20160106_15_01_43_Pro.mp4 WP_20160106_15_02_07_Pro.mp4 1 Share this post Link to post Share on other sites
psalms83:18 174 #29 Posted January 6, 2016 I cant even watch the videos ""i "" downloaded onto here.!! From this very phone.! Anyone else have problems with those Las two videos?? Share this post Link to post Share on other sites
danjmah 71 #30 Posted January 7, 2016 15 hours ago, psalms83:18 said: I cant even watch the videos ""i "" downloaded onto here.!! From this very phone.! Anyone else have problems with those Las two videos?? I was able to view them successfully, thx Share this post Link to post Share on other sites
TDF5G 2,051 #31 Posted January 7, 2016 I was able to see videos on PC desktop. They download as mp4. Share this post Link to post Share on other sites
