Bpopilek 4 #1 Posted December 11, 2015 Hello all, I have a Wheel Horse 212-5 and I am trying to find the dust caps that go over the rear axel ends. I am missing 1 cap. I spent days fighting to get a seized rim off, and now that I have it all cleaned up and back on the tractor, I want to prevent it from happening again. I checked a local Toro dealer and they said all parts for this model are discontinued. Is there anywhere I can order new rear caps, or anything that is similar enough to work? Thanks! 1 Share this post Link to post Share on other sites
AMC RULES 37,196 #2 Posted December 11, 2015 http://www.wheelhorseforum.com/topic/31908-04-rubber-hub-caps-lenses-6-items-here/ 1 Share this post Link to post Share on other sites
bds1984 1,499 #3 Posted December 11, 2015 If they're the same size as those found on the front wheels of my C165, 312, and non-swept axle 520, you can find them easily at any John Deere dealer. 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,499 #4 Posted December 11, 2015 (edited) by the way. welcome to red square Glenn Edited December 11, 2015 by JERSEYHAWG / Glenn Share this post Link to post Share on other sites
DougC 2,643 #5 Posted December 11, 2015 Hello and welcome to the forum. Share this post Link to post Share on other sites
Retired Wrencher 5,788 #6 Posted December 12, 2015 Enjoy the site. Share this post Link to post Share on other sites
Bpopilek 4 #8 Posted December 13, 2015 Thank you everyone for the info and warm welcome! I'll probably end up ordering some from the link in the first reply. I've got another question, but I'll start a new thread since it is about a different topic. Thanks again! 1 Share this post Link to post Share on other sites
AMC RULES 37,196 #9 Posted December 13, 2015 There're no disappoints to be had here... when placing orders from any of our vendors. http://www.wheelhorseforum.com/forum/92-vendors/ http://www.wheelhorseforum.com/store/ Share this post Link to post Share on other sites
squonk 43,842 #10 Posted December 13, 2015 I had a 210-H and if the caps mine had are the same as yours, the std Wh caps won't fit. Best to measure the stubs on your wheels first and contact Glen direct. Share this post Link to post Share on other sites
