Martin 2,133 #1 Posted November 29, 2015 I need some help here..... A close up pic of the motion control handle that was used on the column levers of the 90s 3,4, 500 series tractors is needed. The pic needs to show the printed instruction that was in the inset part of the handle. All my hydro tractors are worn on the handles in this area and i can't get a good layout pic of that area. The manual has the details of what was printed on the handle but manual illustrations were not always to scale. A nice straight on clear pic would be much appreciated from any members who have access to a good handle with as much of the detail as possible of the layout. Thanks in advance....... Heres what I'm after........ Share this post Link to post Share on other sites
bmsgaffer 2,053 #2 Posted November 30, 2015 Heres what I have. Its mostly all still recessed but some paint has worn off. Click through to the "original size" as its is 13 Megapixels. 2 Share this post Link to post Share on other sites
Martin 2,133 #3 Posted November 30, 2015 Thank you.... That is perfect..... Share this post Link to post Share on other sites
